For velocity or positioning control.

Servo-Tek's dc servo control systems can be programmed to operate either as velocity or positioning servos, and can easily be converted from one operational mode to the other This conversion is accomplished with a programming connector--no internal modifications are necessary.
The systems consist of a dc servomotor/tach-generator combination (with optional gearing) and a servo amplifier package. Systems provide 2.0 oz-in. of torque (ungeared), up to 75 oz-in. with integral gearing.

For further application information on the dc servo control systems, write for Servo-Tek's manual, "DC Servo Control System."

Features

• Variable torque limiting controls--provide independent control of output torque in both directions of rotation.
• Solid-state operation--ensuring high accuracies under varying load. Line voltage, and environmental conditions.
• DC servomotor/tach-generator combination--ensures no misalignment problems, top-notch performance.
• Integral gearing can be provided-4.3:1 to 7200:1 ratios are available.

Eliminate coupling problems with this two-in-one combination.

Servo-Tek motor-generators are designed for use in high performance velocity and positioning servo systems, and in other applications requiring a motor and generator in combination. The servomotor and tach generator are mounted on a common shaft, eliminating the coupling problems that can limit servo design specifications. Integral gearing can also be supplied as part of the package.

Servomotors

Motors are available with operating voltages from 5 to 48 Vdc at 10,000 rpm. Continuous output torques range up to 2.0 oz-in. (ungeared) and to 75 oz-in. with integral gearing.

Tach Generators

Tachs provide output voltages up to 10 V/1000 rpm.

Gear Reducers

Integral gear trains are available in various ratios as specified bottom left. Units with gear reducers have operating temperature range of 0 to 212°F.